preliminary data she et | october 28 , 2007 1 of 6 for more information on this and other products: contact sales at emcore 626-293-3400, or visit www.emcore.com. applications high performance supertrunking links high power distribution networks fiber deep architectures fttx networks features full function high power fiber optic amplifier ready for integration low noise figure (typ < 6 db) total input power range: C10 dbm to +12 dbm total output power: +27 dbm to +35 dbm (optical output power splitter is optional for these units) standard rs-232 communications low electrical power consumption input / output isolation > 40/40 db polarization dependant gain < 0.1 db polarization mode dispersion < 0.5 ps the ortel pona 3000 series fiber optical amplifier module is an ideal building block for oem system integrators. the family of pona 3000 optical amplifiers is designed to meet the most demanding noise performance requirements of catv and fttx applications, and performs all the functions required of an optical amplifier for system integration. pona 3000 series optical amplifiers provide optical isolation on the input and output of the gain block for stable, low noise operation. the input and output optical signal power levels are detected for monitoring and control. the input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. the pona 3000 series optical amplifiers also provide monitoring functions and associated alarms for all vital characteristics. the optical output of the pona 3000 series optical amplifiers can be split into number of ports by an optional internal splitter. pona3000 series includes ac/dc power supply, front panel, optical splitters, network card and all necessary connectors. pona 3000 series erbium doped fiber amplifier
preliminary data she et | october 28 , 2007 2 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation pona3000 series high power edfa specifications property unit limit pona models comment product code 3027 3030 3032 3035 performance (note 1) operating input power pin (dbm) max +12 +12 +12 +12 operating input power pin (dbm) min -10 -10 -10 -10 output power po (dbm) 27.0 30.0 32.0 35.0 nominal (note 2) noise figure nf (db) typ/max 5.5/6.0 5.5/6.0 5.5/6.0 5.5/6.0 (note 3) static gain flatness gf (db) max +/-1.0 +/-1.0 +/-1.0 +/-1.0 (note 4) dynamic gain flatness (db) max +/-2.00 +/-2.00 +/-2.25 +/-2.50 (note 5) output power stability (db) max +/- 0.25 +/- 0.25 +/-0.25 +/- 0.25 (note 6) power consumption (steady state regime) psys (w) max 40 25 50 30 65 40 80 50 50 o c case (premium) 50 o c case (economy) (note7) remnant pump power to output prp (dbm) nom. <-30 <-30 <-30 <-30 notes: 1) unless stated otherwise all specifications apply over the full temperature range and humidity 2) depending on the fiber optic patchcord interface the measured value can vary up to 0.5 db less than the actual value 3) measured @ 25 c, s pin = 0 dbm 4) measured with a swept probe signal (pp), where pp = 0 dbm @ 25 c 5) measured with a swept probe signal (pp), and a fixed tone signal (pt) @ 1553nm; (pt = pp+20 db; pt + pp = 0 dbm) @ 25 c 6) stability over polarization and temperature 7) premium version C pona with cooled, telcordia qualified pumps economy version C pona with uncooled pumps physical general property requirement comments operating wavelength 1545 ~ 1562nm standard operating case temperature 0 c to 50 c standard storage temperature -40 c to 85 c standard operating humidity 20% to 85% non-condensing voltage supply range 85 vac to 265 vac 50/60 hz -36 to -60 v dc ac version dc version *(redundant power supply is available by customer request) optical connectors see ordering information user specified dimensions in inches 19.0w x 14.76d x 3.44h 19 rack mounted, 2 ru
preliminary data she et | october 28 , 2007 3 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation pona3000 series high power edfa block diagram: cladding pump technology cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to produce cost effective high power optical amplification. this technology enables the development of higher power edfas-something that is cost prohibitive when using standard erbium fiber and single mode pumps. sample fttx architecture ont edfa 20 outputs of 20 dbm wdm rf olt homes businesses multi dwelling units splitter ont video 1490nm 1310nm 1550nm 20 km 1550nm tx - voice - data - video data voice splitter splitter splitter ont ont ont ont ont ont ont ont ont ont ont ont edfa 20 outputs of 20 dbm wdm rf olt homes businesses multi dwelling units splitter ont ont video video 1490nm 1310nm 1550nm 20 km 1550nm tx - voice - data - video data data voice voice splitter splitter splitter ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont 980 nm pump output monitor input monitor multi-mode pumps drive electronics er er/yb assembly input hybrid filter / isolator isolator 1% tap 980 nm pump output monitor input monitor multi-mode pumps drive electronics er er/yb assembly input hybrid filter / isolator isolator 1% tap
preliminary data she et | october 28 , 2007 4 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation pona3000 series high power edfa outline drawing ac and dc versions shown below with 8-port option
5 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data she et | october 28 , 2007 pona3000 series high power edfa laser safety information this product meets the applicable requirements of 21 cfr 1010 & 1040 and is classified as a class iv laser product based on the maximum optical output power shown below. during use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation and would meet the requirements for a class i laser product. the laser product report has been submitted to the cdrh and the accession number is expected by october 2006. wavelength = 1545 ~ 1562 nm (dependant on input source) maximum output power = 3.2 w (single output, 35 dbm model)
6 of 6 ortel, a division of emcore 2015 west chestnut street alhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2007. emcore corporation preliminary data she et | october 28 , 2007 pona3000 series high power edfa ordering information * pona30 - - - - class : premium: utilizes cooled pump lasers economy: utilizes uncooled pump lasers * pona3000 series with one or two optical outputs will have special high power output optical connector(s) and optical bulkhead(s) for exact model number, please contact your sales representative. qualifications fcc: subpart b. part 15, class a unintentional radiators ce: en50083-2, 19995 with amendment 1, which incorporates en 55013 radiated and conducted emissions en 61000-4-3 radiated immunity en 55020 conducted immunity en 61000-3-2 harmonics all components meet telcordia gr-1312 and gr-486 standards (except pumps in economy class). en 61000-3-2 harmonics fit rate: 90% level of confidence < 2000 @ 30 c premium pona 3035 90% level of confidence < 3500 @ 30 c economy pona 3035 information contained herein is deemed to be reliable and accurate as of issue date. emcore reserves the right to change the design or specifications of the product at any time without notice. ortel, the ortel logo, emcore, and the emcore logo are trademarks of emcore corporation. power level connector options # of output ports class input voltage 27 : 27 dbm sc : sc/apc 01 : 1 port p : premium ac : 90-260 vac 50/60 hz 30 : 30 dbm fc : fc/apc 02 : 2 ports e : economy dc : -48 vdc 32 : 32 dbm ec : e2000/apc 04 : 4 ports 2dc : redundant dc 35 : 35 dbm tc : sc/upc 08 : 8 ports gc : fc/upc 16 : 16 ports 20 : 20 ports - -
|
